PowMr Solar Charge Controller Waterproof - 10A Charge Controller 12V 24V Auto Load on 24Hours IP68 Waterproof Solar Controller for Lead-Acid Battery (CMP-03 10A) by PowMr at My Landscape Team. Hurry! Limited time offer. Offer valid only while supplies last. Safety Instructions: A) Make sure your BAT has enough voltage for the waterproof solar charge controller to recognize the batteries type before first installation and only sufficient voltage can charge or activate the controller. That means it won't charge or activate when hooked to a dead or low-voltage BAT, or connecting only with solar panel but without BAT B) The connection cable should be as short as possible to minimize loss. C) The solar regulator is only suitable for lead acid batteries
Product Description & Reviews
Safety Instructions: A) Make sure your BAT has enough voltage for the waterproof solar charge controller to recognize the batteries type before first installation and only sufficient voltage can charge or activate the controller. That means it won't charge or activate when hooked to a dead or low-voltage BAT, or connecting only with solar panel but without BAT B) The connection cable should be as short as possible to minimize loss. C) The solar regulator is only suitable for lead acid batteries: OPEN,AGM, GEL It is not suited for nickel metal hydride, lithium ions or other batteries. D) The charge regulator is only suitable for regulating solar panels. Never connect another charging source to the charge regulator. How to connect solar system with the controller: Step 1: Connect the BAT to the solar charge controller firstly- plus and minus.(it will auto adapts to the BAT voltage) Step 2: Connect the load to the controller secondly. Step 3: Connect the solar panel to the controller finally - plus and minus. ♥ Note: The reverse order applies when deinstalling. Specification: ◆ Color: Black ◆ Rated Charging Current:10A ◆ Rated Discharging Current:10A ◆ Max Solar Input Voltage: ＜41V ◆ System Voltage:12V/24V Auto Adapt ◆ Self consume: ＜10mA◆ Operating Temperature: -20 ~ +60℃ ◆ Equalize Charging Voltage:14.4V/28.8V ◆ Bulk Charging Voltage:14.2V/28.4V ◆ Float Charging:13.8V/27.6V ◆ Discharge Stop Voltage:11.2V/22.4V ◆ Discharge Reconnect Voltage:12.6V/25.2V ◆ Housing: Aluminum Alloy ◆ Maximum Wire Size:16AWG◆ Size/Weight: 3.23* 2.94* 0.83in/0.27lb Package Include： ● 1 X 10A Waterproof Solar Charge Controller ● 1 X English User Manual
Features & Highlights
- 🙌 INPUT VOLTAGE BETWEEN 15V AND 41V - The 10A solar controller waterproof(IP68) is suitable for Outdoor Use. Intelligent 4-stage PWM charging.The solar panels can convert light energy into electric energy stored in batteries which will be protected by the solar controller.
- 🙌 Maximum power of solar panel is 120W for 12Vdc system and 240W for 24Vdc system, and the maximum current 10A. It is suitable for 12Vdc/24Vdc rechargeable batteries. In order to lengthen its service life, please do not overload.
- 🙌 EASY TO MONITOR THE LED INDICATOR LIGHTS - The solar controller integrates Three LED indicator lights: green (Charge indicator), White (BAT power indicator) and Red (Output indicator). The product also provides short-circuit, open-circuit, overload protection, as well as Dual MOSFET Reverse current and low heat protection
- 🙌 PWM CHARGE CONTROLLER - Working mode is 24 hours. Easy to mount directly to the frame of solar panel, the almost fuselage are surrounded by aluminium with heat sink to dissipate heat.
- 🙌 ALL-ROUND PROTECTION - The product also provides short-circuit, open-circuit, over charge, overload protection, as well as Dual MOSFET Reverse current and low heat protection. For any reason you are unsatisfied with our product, just feel free to contact support for exchange or refund. Our email is firstname.lastname@example.org. Your Satisfaction is our priority.
3.98 x 1.22 x 4.02 inches
Have questions about this item (0655160062377), or would like to inquire about a custom or bulk order?
If you have any questions about this product by PowMr, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
60A MCU Solar Charge Controller Using innovative MPPT technology with high tracking efficiency up to 99%, the charge controller efficiently charges your off-grid solar battery bank safely day in, day out.LCD panel display design, dynamically displayi...
Product SpecificationMultiple load control modes: manual control, lighting ON/OFF, light On+TimerAdvanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%Wide MPPT operating voltage range12/24VDC automatically identi...
mpn: CHC-LCD-30, ean: 0617209854404,
WindyNation's P30L solar charge controller is a premium grade PWM solar controller. The digital display provides all necessary solar system information and also serves as a user interface for adjusting the charge controller's settings. It is the perf...
mpn: 1400W80, ean: 0674551411426,
1.The Wind turbine charging part and Solar charging part are independent of each other, can make Wind turbine controller or solar controller using independent (As a Wind turbine controller cannot use light control function). 2.Parameter： Wind t...